The ELK-M1XEP serves as an Ethernet Appliance equipped with an RS-232 Serial Port Interface. Its primary function is to establish a connection between a control unit within the M1 Family and an Ethernet network. Notably, it offers email event notification and employs FIPS compliant encryption algorithms, making it suitable for security-sensitive environments.
Power is supplied to this appliance through an ELK-P1216 12 Volts DC, 1.5 Amp plug-in power supply/adapter. Configuring the connection setup, network password, and related settings can be easily accomplished using the built-in software setup utility within ElkRP.
By default, the M1 Ethernet Interface is set to obtain a dynamic IP address from a DHCP server (e.g., router, cable modem). However, it can also be optionally configured with a static IP address as needed.
- Operating Voltage: 12 Volts D.C. from Elk-P1216 Plug-in Power Supply **
- Current Draw: approx. 300 mA
- Housing Dimensions: 4.25″ x 6.375″ x 2.125″
- Circuit Board Dimensions: 2.25″ x 3.95″
- ELK-W040A Serial Ribbon Cable included
- Secure connection with password protection and SSL/TLS encryption
- Flash Memory for Firmware Updating
- Event notification via E-Mail (SMTP)
- Supports automatic Dynamic DNS Updates with providers using the DynDNS protocol.
- Supports Network Time Protocol for synchronizing the M1/EZ8’s clock with an Internet time server.
- Internet Monitoring and Reporting Capability
- Network stack supporting the following protocols:
- -TCP,UDP,DHCP,SSL/TLS, NTP, SMTP
- Federal Information Processing Standards (FIPS) 128 bit encryption
- Integrated 802.3 compliant 10/100 Mbit network interface
- RS232, DB9M 9-pin serial port connection
- Connects to the M1 RS-232 Serial port (Port 0). The baud rate for this port must be set to 115,200 (factory default)
- RJ45 8-pin Network Jack
- 1mm barrel type power connector (center positive)
- LED Indicators for Power, Link, and Data
