NetAlly® LinkRunner AT 1000 Network Tester

Call for Price

The LinkRunner AT Network Tester is a rugged, fast, and complete copper and fiber Ethernet network connectivity tester. It performs an essential set of network connectivity tests, enabling you to quickly and accurately identify and solve network connectivity problems.

  • Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest.
  • Validate up to 30W 802.3af/at PSE with TruePower™ loaded Power over Ethernet (PoE) test.
  • Verify twisted-pair cable length and wire-map in a snap.
  • Automate reporting and enable collaboration with upload and management test results via Link-Live Cloud Service.

Contact Us for Product and Pricing Information:

SKU: LRAT-1000 Categories: , , Tag:

The LinkRunner AT Network Tester is a rugged, fast, and complete copper and fiber Ethernet network connectivity tester. It performs an essential set of network connectivity tests, enabling you to quickly and accurately identify and solve network connectivity problems.


The LinkRunner AT Network AutoTester is available in two models: LRAT-2000 and LRAT-1000.

LinkRunner AT 2000 features include*:
– Fiber support
– TruePower™ PoE Power Test up to 30W
– IPv6 support
– Reflector support
– More reports: 50 instead of 10
– Uses Li-ION rechargeable battery instead of an AA battery pack

*These exclusive features cannot be added to the LinkRunner AT 1000.

Cable Length, Wiremap, and Location

Cable Location
Locate cable runs with toning, switch port advertisement, switch port link light blinking, and remote cable identifiers. Toning supports both analog and digital IntelliTone modes.

Cable Wiremap and Length

Check patch cables using the built-in wiremap port, including pin-to-pin connection, or installed wiring for length, shorts, or opens or split pairs.
Easily find opens, shorts, miswires, and split pairs three different ways:
– On non-terminated cable
– With a WireView Cable Identifier
– With the built-in wiremap port on the side of the LinkRunner AT

Packet Reflector

The LinkRunner AT packet reflector mode allows it to be used as a remote device during end-to-end network path performance tests to validate LAN and WAN throughput capabilities up to 1Gbps. The reflector mode can be configured to swap MAC and/or IP addresses.

LinkRunner AT 2000 supports packet reflection for:
– OptiView® XG Network Analysis Tablet
– OneTouch™ AT Network Assistant
– EtherScope™ Network Assistant
– MetroScope™ Service Provider Assistant
– Any device generating 802.3 frame or IP packet streams

Automated Test Results Management to Link-Live Cloud Service

Serving as a centralized test results and device management system, the complimentary Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, AirCheck G2, and OneTouch AT hand-held network testers. Once the instrument is connected to the Link-Live Cloud Service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates “over the network” from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

This unified dashboard of both wired and Wi-Fi network connectivity results enables you to:
– Reduce results management overhead for multiple testers and users
– Enables seamless collaboration between site personnel and remote experts
– Simplify report generation across media types for network deployment documentation
– Attach photos, user comments to each result, adding context for future changes and troubleshooting
– For asset management, ability to associate serial numbers of installed devices, and/or cable/wall jack label to specific test

Local Reporting Mode
Alternatively, you can enable the Local Reporting Mode to facilitate saving of AutoTest results on the tester. For AutoTest results saved locally on the tester, the included MS windows-based LinkRunner AT Manager Software facilitates management and analysis of test results, test reports, and testers.

Dimensions3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight18 oz (0.5 kg)
BatteryRemovable, rechargeable lithium-ion battery pack (18.5 Watt-hrs)
Battery LifeTypical operating life is 6 hours; Typical charge time is 3 hours
External AC Adapter/ChargerAC input 90 to 264V AC 48 to 62 Hz input power DC output 15V DC at 1.2 Amps
Display2.8 in color LCD (320 x 240 pixels)
Keypad12-key elastomeric
Tone GeneratorIntelliTone™ digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Media Access; CopperRJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at)
Media Access; FiberSFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable TestsPair lengths, opens, shorts, splits, crossed, straight through, and cable ID
Power over Ethernet (PoE)Single ended testing:
User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation
The following PSE PoE parameters are measured:
Pairs used
Received class
PSE type
Unloaded voltage(V)
Loaded voltage (V) (LRAT-2000 with TruePower™)
Unloaded power (W) (LRAT-1000)
Loaded power (W) (LRAT-2000 with TruePower™)
Supporting Operating SystemsWindows® 8.1 and Windows® 10
Minimum hardware requirement:
Processor: 1 GHz or better CPU
RAM: 1 GB or more
Hard Disk: 1 MB available space
Display: 1024 x 768 high color, 32-bit (recommended)
Interface: USB
Operating Temperature and Relative Humidity32°F to 113°F (0°C to +45°C) Note: The battery will not charge if the internal temperature of the tester is above 113°F (45°C)
Operating Relative Humidity (% RH without condensation)90% (50°F to 95°F; 10°C to 35°C) 75% (95°F to 113°F; 35°C to 45°C)
Storage Temperature-4°F to 140°F (-20°C to +60°C)
Shock and VibrationRandom, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
SafetyEN 61010-1 2nd edition
Safety (LR-AT 2000 only)EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude4,000 m; Storage: 12,000 m
EMCFCC Part 15 Class A, EN 61326-1
Certifications and ComplianceConforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association
LinkRunner AT Manager Software
Supporting Operating SystemsWindows® 8.1 and Window®10
Processor1 Ghz or better
RAM1 GB or more
Hard Disk1 GB available space
Display1024 x 768 high color, 32-bit (recommended)



© 2021 Cable and Connections Acquisition Company LLC. | 888-WIRE-682 (888-947-3682)